Door Guard Plates

 A door guard plate is a protective device that is applied to the lower or larger surface of the door. It is installed on either the pull or push side of an opening and may be up to 48 inches in width. It must not interfere with locking hardware. If the plate is longer than the opening, it should be notchted around the preps. It also helps to choose a tempered glass with a high fire resistance rating.

Door guard plates may also be ordered separately. They are typically designed to fit doors made of aluminum. They are available in different styles and sizes. Many models of protection plates feature counter-sunk mounting holes, beveled edges, and other options. Fire-rated kick plates should be purchased for doors that are over 16 inches tall. Generally, protection plates should be about an inch less than the height of the bottom rail and two inches less than the width of the door.

A door guard plate may also be used for a single door. It is cut 1" smaller than the width of the door and centered on each panel. A safety plate is useful for outward opening doors, where there may be a risk of suffocation. A proper door guard plate will protect the lock and prevent breakage. It may also help protect the face of the outside of the door from debris or insects.

A door guard plate is a must-have for a commercial facility. If the front edge of the door is exposed to foot traffic, this type of protection is ideal. Stretchers can easily knock the doors open or knock them closed, so it is vital to install one. Most protector bars and corner guards will fit standard three-foot-wide doors. They may be a separate part, but they can be purchased together to provide extra protection for the vulnerable area of the door.

Door guards are essential for securing doors. They can be made of steel or aluminum and are the most secure way to protect a home. They are easy to install, but a good door guard should be installed in a visible location. A door guard plate can add security to a home or business. However, it is vital to consider the purpose of a door guard plate. Regardless of the design, it will protect the edges of a door from wear and tear.

A door guard plate can be used for single or double doors. It is usually a flat plate that extends out from the edge of the door. A door guard plate should not encroach on a kick plate or other components. A good door guard will protect the entire panel. It will also protect the doors from bumps and abrasions. The edge guard should be installed on a sliding glass entrance.

Protective door guards are also popular for commercial doors. They cover the upper or lower portion of a door, and most protect one or both sides. Its width depends on the size of the door, but it is always centered on the panel. The plate should be centered on the door panel. If you don't want to use a stretcher protection, you can cut it to fit the width of your door. But you need to make sure that the plate is not overlapping the kick plates.

There are different types of protection plates. The most common type is the stretcher plate. It is applied to the face of the door. Then it covers the edge of the door. It is a good option for doors that open above the floor. The protection plate will protect the doors by preventing the doors from slamming into each other. It will also prevent damage to the door by the stretcher. It is important to make sure that the protection plate covers the top or bottom rail of the door.

A protective door guard plate is not necessary on every commercial door. A protective cover can cover one side or the lower section of a wall. They are usually 2 inches less wide than the panel. In order to protect the face of the door, the protection plate should cover the opening that is higher than the floor. The height of the plate should be greater than the width of the doors. The protection plate must also cover the entire opening. The best protection doorguard is one that is installed on both sides and the top and bottom of the wall.