Door kick plates are a rectangular sheet of steel which is fitted on the underside of your exterior door to prevent your door from being damaged by knocks and other impacts. They are usually made from aluminum, stainless steel or brass, although sometimes they can be made from vinyl or fibreglass, as well. They are placed at the back of the door and are used to deflect any blows which may be directed against the door - for example, if you have a door which is constantly being pounded by children or pets. These are normally very effective, but occasionally they will become cracked or broken. If this happens, you can replace them quite easily by following certain simple steps.
First of all, before fitting door kick plates to your doors, you may want to consider whether you actually need them. For example, if the damage to the door is not very serious, you may want to purchase an entirely different type of door. For instance, if you have wooden doors, you may want to purchase a steel plate rather than an aluminum one. Also, if you have a patio sliding door, you may want to fit a plate which is made of acrylic rather than plastic.
Once you have considered this, you should look at the types of door kick plates which are available. You will find that there are two basic styles: ones which are mounted at the top of the door (which look a lot like toughened glass) and ones which are mounted at the bottom of the door. Although they look similar, the actual plates do not all have the same level of impact protection. Therefore, you will need to look at what sort of impact protection you require, and which sort of plate you require, as well as the thickness and weight of the material which the plates are made from.
When it comes to buying door kick plates, you need to know what style you prefer. The first option is to buy the door-plate with the screws already included. However, unless you have stripped the screws, you will be unable to install the plate on your own. Another option is to buy a plate which has the screws already pre-installed but which is then sold with the plate included. This allows you to avoid the possibility of stripped screws, although you will probably need to drill some more holes in the door frame to screw the plate into.
As well as being great at tackling heavy door kick plates, they are also great at stopping loud knocks and bangs from outside. They will stop all sorts of loud noises from outside, including sirens, emergency lights and blaring horns. They also stop people from walking through them, as they are effectively a solid barrier, keeping people in. This is especially useful for preventing pedestrians from being injured by unstable or slagged floor boards.
Door kick plates come in a wide variety of materials. For example, you can buy door kick plates made of steel, aluminum or wood. Each of these materials has their own benefits and drawbacks. Steel door-plates tend to be the best at stopping loud impacts, as they are extremely tough. However, they can rust, bend and develop deep grooves that can damage your doors and other wooden components if not maintained properly.
Aluminum door kick plates tend to be the best at resisting impacts, as they are far softer than steel. However, they rust and are easily dented. Wood doors are also difficult to install steel door-plates onto, as they are prone to warping and splitting. However, they do allow for good sound insulation, which can help lower your heating bills.
Remember, all of this information is designed to make your job as easy as possible when choosing the best door kick plates for your home. The first thing you need to do is determine which material will work best for your needs. Then, go online and take a look at prices so that you can find the best value door kick plates. Finally, test all of your new door openers before any foot traffic occurs, and keep an eye on them for normal wear and tear.
No comments:
Post a Comment