Door kick plates are basically a piece of metal attached directly to the bottom of the door of your home to prevent it from damage during heavy door slams. They got their name from the way people slam the door closed when they're carrying their hands full during a door slamming experience. So that's why you'll often see them in public and commercial buildings, where slamming doors can be dangerous.
There are two different types of door kick plates available on the market today. The first kind is a fully encapsulated door safety plate. These door safety plates are made up of a thick steel plate that wraps around the door itself. This provides effective protection to the door from objects penetrating it as well as normal everyday wear and tear. They tend to be thicker in thickness than the second type, which is a hard-plate door safety cover that protects the door from normal wear and tear as well.
These door kick plates work just like other door locks do. When you lock your door with a key, the door automatically locks, right? Well, this kind of lock works the same way. This is a lot easier than a regular lock, too. The door will lock itself when the key cannot be put in any standard sized holes.
Aside from preventing doors from slamming, door kick plates also keep objects from penetrating them. Think about it - a heavy object is being pushed against a door. It might as well try to penetrate its material with something that it has no hope of penetrating (since it's not solid). If the object is not heavy enough, the door will simply slam shut. However, if the object is heavy enough, it could cause some strain on the door itself.
Also, there are some good reasons for using door kick plates in other types of entry doors. There are cases where solid objects could easily damage wooden doors, for instance. But using a plate that acts as an obstacle between the door and whatever it's trying to get through can make sure that these things don't even have a chance to enter the material. The same goes for things like heavy pieces of furniture entering through the seal. These things might seem too heavy to move, but when you add that extra layer of support between them and the door, it might make a big difference in the chances of the door breaking down.
Now, let's look at some other types of commercial buildings where door kick plates are commonly used. Let's say, for instance, that you are in a bank and you want to lock up the doors at the end of the day. In this case, you would use a door lock that pushes into the center, right? Of course, not everyone has access to a computer, security cuff, or even a company's property management company, which means that you would have to install door kick plates on your own.
This is something that is frequently used in several different types of buildings and industries. There are some instances where a door kick plate can be installed as part of the installation of a building or even a door. In fact, some building managers are actually working with companies right now that want to use door kick plates on their doors so that they can have a bit more security and a better-looking exterior. It's a common practice for a building manager to install this type of equipment, especially if he or she has a high-security building or something similar.
But how do you install door kick plates? Well, first you need to know exactly how to do the installation, because there are certain steps that have to be followed in order to get a door plate into the right place. The first step is removing the interior trim from around your door. You then have to take out the screws that are holding everything in place, which will require unscrewing them. Once you have the screws loose you can simply pull the door out or simply drill the screw holes to make it easier to install it the correct way.
No comments:
Post a Comment